Jeep owner/operator

Great product heavy duty and well constructed. Actually used not on a stretch but as a replacement for the factory mount put with additional length to compensate for lift. Made to fit frame perfectly in stretch but will also work as i used it by tipping the angle a bit. Saved me a ton of work.

I need a rod end for this bracket...the frame side trackbar bracket

Hi, do you think that this would work for a RHD Wrangler. I'm wanting to do a WJ knuckle/brake swap and will need to relocate the track bar I think, Especially if I go over knuckle.

Can the holes be drilled out to 3/4"?

A — Staff (Artec Team): Yes the bolt holes can be drilled out to 3/4 " safely

Would this part work with a 2006 Jeep TJ with no lift? My track bar mount frame side has broke and I can not find a replacement. Thanks

A — Staff (Artec Team): This bracket will only work if you are stretching the wheelbase due to the mounting location being forward of oem . you may be able to use BR1027 with some modification

What size are the mounting holes on this bracket?

A — Staff (Artec Team): the mounting holes are 9/16" but you can drill them larger if needed .

i do not know how weld. so i am trying to find out if this bracket i can use to bolt on to the frame? and if not can you guide me to find the right bracket for my problem

A — Staff (Artec Team): This bracket is designed to be welded onto the frame, for the stress that a track bar bracket is put under a bolt on bracket is a bad idea. I would check your local welding or off road shops for someone who can weld a bracket on for you .