Heavy duty and Reliable

Im so happy with the quality of this bracket. I tacked it on and let a professional shop finish my welds. I truly think it is the toughest piece of hardware on my jeep.

Great Product, More Instructions

This is a really nice solid bracket I havent had a chance to get it welded to the axle yet but its proving quite difficult to figure out what needs to be cut. I am excited to get this on and fix my worn out holes but I would say that the manufacturer could do a little better with providing more instruction.

This bracket was a great replacement for the factory setup. Super beefy and fairly easy to install.

Jeep fan

Super beefy. Aligned easily.

mister

Great quality and way better than stock

Customer

Fit great. It was well made and really solved the problem. High quality and well planned out.

hey

I bought this bracket after replacing all of the bushings on my control arms and axle as well as my ball joints and unit bearings but still getting death wobble after some searching I found that the track bar brackets bolt hole sometimes gets wallowed out so I drilled out the bracket and the bushing and went with a bigger bolt but it seems to have wallowed out again. Should be getting the jeep over to the welder in the next few days so I have not found out yet if this will definitely correct my problem but I have to say that the bracket is solid thick steel that will definitely not wallow out.

Very impressed

This bracket is great for a simple clean install when the factory hole is beyond repair or in my case previous owner made a home made bracket that was garbage. With a simple buzz box welder the artec bracket will get your tj back to factory steering specs.

Solid little bracket that does its job. It does not include a mount for a steering stabilizer which I know isnt required but would have been nice.

Have used this bracket on several different axles over the years. Makes for a nice clean install if you have the worn out track bar mount holes.

Is the sway bracket at the stock height or extended

A — Staff (Artec Team): Good morning Cameron. This Sway bar tab is at a stock height.

I ordered this part and just noticed there is no mount for the steering dampener, what should I be doing then? Does the OE one stay in place?

A — Staff (Artec Team): There is a second hole that you can run a bolt through to mount the steering damper

Does the bracket index off of the inner C on the pass. side? Is it pretty straight forward in getting it aligned in the correct plane vertically ?

A — Staff (Artec Team): You cut off the factory bracket and this will weld into place of the oe bracket