Great, quality part.

fabricator

well made with no burs and true bends. my only complaint is I wish the inside dimension of the bracket was 2 or wider. the 1.75 limits your choices of link ends

You can never have to many options in height and being adjustable

Another Great Product

Ive ordered thousands of dollars worth of parts for my TJ 1-ton build. Artec by far has been the most efficient and easiest to deal with. Their quality is unmatched and make designing and building a custom suspension so much easier by taking guesswork out of it.

Fab. Asst.

We turn to ARTEC because they build quality. No returns no flaws no quality control issues. Period.

What heim joints do I need for this bracket to build a new track bar link?

A — Staff (Artec Team): You will want to use RE1430 or RE1430 depending on Standard or Reverse thread found here : https://www.artecindustries.com/jmxre78

What diameter are the holes?

A — Staff (Artec Team): The hole diameter is 9/16"

What is the distance from the side of the frame mount to the bolt hole center? Where would the center hole be under the frame side to side.

A — Staff (Artec Team): About an inch from the side to the hole center. The center hole would be about 4" below the frame.

I am having difficulty finding a rod end with a 1. 75" width. Do you have any suggestions for these? All the 3/4 rod ends I'm finding measure two inches overall width with misalignment spacers

A — Staff (Artec Team): Our 3/4"Misalignment spacers are 1.75" Wide when used in a 3/4"-3/4" Bore or 7/8"-3/4" Bore Rod Ends. You can find them here: http://www.artecindustries.com/34-High-Misalignment-Spacers-SS-pair_p_235.html