Install videos are coming soon.
I bought this for my 85 Chevy dana 60. Its a great quality for the mount. Really nice design. Comes with support brackets everything cleared and I had no issues I used a PSC ram.
This product is the top of the line. They really know what they are doing. It went right in without no problem. My full hydro steering fit perfect and didnt have to fab it at all Artec really puts out a good product
Our full hydro mount fit perfect on our Currie Rock Jock VXR 60. The part fit like it was made for it. We did add a few gussets at the out edges to make it perfect. Awesome part and awesome quality
Excellent fit (even on an axle it really wasnt designed to be on) Good quality. Will continue to buy Artec products
I really liked the clean look of the Artec Ram mount compared to a lot of others I had been looking at. My only issue is I was running leaf springs which complicated things some and I did not want to purchase a product that I had to redesign or chop up severely to work. I went ahead and took the chance on this mount and am happy to say that I had to do very little to make it work for my application. Basically only having to notch it in a couple places for the leaf spring u-bolts. Very satisfied with the final look and fitment.
nice piece drawing shows holes for mount that are not there not a big deal but it should be corrected
I had to do a little bit of trimming on this product because of the way my bottom links are attached and my top Artec Truse. But such a great time saver then building it yourself.
I took a chance and ordered the 85-91 Ford kit to try to fit on a 05 Superduty Dana 60 with the JK 1 Ton truss (Going on a XJ). Works great As always the quality of the parts and fitment together are perfect. For my application I had to do a bit of minor trimming to make it work but not a big deal at all. Modifications required 1) The 05 axle has a bigger 3.75 tube diameter so the copes for the braces needed to get enlarged by cutting a sliver out. 2) I made some minor trims at the diff opening to fit around the larger shoulders on center casting. 3) I slightly trimmed the outer upper corners to fit up against the trusses coil seats. The width is perfect and matches the outer edges of coil mounts to tie together. 4) FYI I dont think this would work with the standard JK 1Ton track bar bracket in ite correct location but Im modifying that and moving it up higher for my set up and that will clear the steering. I am using this with the Trail Gear hydro ram (not listed in description) using 1 thick weld on threaded plates for the brackets. 1 plates gets the ram up just over the round openings in the braces. Even with the shorter superduty steering arms everything seems to clear fine. Great kit (Hope this helps someone with a non-standard application)
A — Staff (Artec Team): The RM6007 would be a better option for the Ultimate D60
A — Staff (Artec Team): In order to answer this question accurately, please email dimensions of axle tube length on each side to sales@artecindustries.com
A — Staff (Artec Team): They can be used with leafs but you typically have to roll them down to clear leafs.
A — Staff (Artec Team): This truss is designed to be used with a d60 axle for a d44 you may want to run the RM6007 Diy Ram mount .
A — Staff (Artec Team): It depends on the curvature of your springs and height of your perches you can rotate the ram mount down to ensure you have proper clearance with your leafs
A — Staff (Artec Team): No, we
A — Staff (Artec Team): RM6005 is the correct part number for a Dodge Kingpin Dana 60 with passenger side drop. It is not designed for Dodge driver side drop axles and is different than the Chevy version.
A — Staff (Artec Team): without high steer It can however you will be rotating the ram mount far down.
4.83 average
1,334 reviews
